![Directed MA3 2018 Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/directed/ma3-2018/ma3-2018_installation-manual_2506736027.webp)
Installation Type 5
To connect the module:
1
Please
ensure
that the vehicle is in a safe location and cannot move forward during
programming. For vehicles equipped with a manual transmission, make sure the gearshift
lever is in the neutral position.
2
Connect
all the harnesses to the Directed Digital Solutions,
EXCEPT
the 12-pin main power
harness.
Connect all but the
12-pin harness
3
Connect
the 12-pin main power harness, and wait until the LED turns ON solid red.
Must be connected LAST
&
Solid
4
Press
the programming button 5 times. The LED will start flashing orange then proceed to
the next step.
&
Flashes
orange
Press 5x
5
Do not
press the brake pedal.
Press
the Push-to-Start (PTS) button twice to turn the ignition
ON.
Do NOT depress
the brake pedal
6
Wait for the module to program (it may flash up to 30 seconds). The LED will turn ON
orange for 3 seconds, then shuts OFF.
Off
Solid
x3 Secs
7
Press
the Push-to-Start (PTS) button once to turn vehicle ignition OFF once the module is suc-
cessfully programmed.
8
Pair
remotes (if applicable). For information on how to pair a specific remote, please
refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*
Pair
remotes*
9
By default, the tachometer is preprogrammed for the vehicle. For instructions on how to
program tach, see page 31.
Initialize
tachometer
You have successfully completed the module programming sequence.
* Your aftermarket remote may differ from the model shown in the illustrations.
27
Directed Digital Solutions MA3
© 2018-03-06 Directed. All rights reserved.