Directed MA3 2018 Скачать руководство пользователя страница 26

Страница: 26 / 34

Module programming

Refer to "LED diagnostics and troubleshooting" on page 28 for more information and for troubleshooting purposes.

Installation Types 1-4

To connect the module:

Please

ensure

that the vehicle is in a safe location and cannot move forward during

programming. For vehicles equipped with a manual transmission, make sure the gearshift
lever is in the neutral position.

Connect

all the harnesses to the Directed Digital Solutions,

EXCEPT

the 12-pin main power

harness.

Connect all but the

12-pin harness

Connect

the 12-pin main power harness, and wait until the LED turns ON solid red.

Note:

To skip the transponder programming and use convenience features only,

press the programming button 5 times. The led flashes orange.

Must be connected LAST

Solid

Do not

press the brake pedal

. Press

the Push-to-Start (PTS) button twice to turn the ignition

ON. The LED will start to flash green.

Note:

If the transponder programming was skipped, the LED turns ON solid orange for 3

seconds then shuts OFF when programming is done.

Flashes

Do NOT depress

the brake pedal

Wait for the module to program (it may flash up to 30 seconds). The LED will turn ON
green for 3 seconds, then shuts OFF.

Off

Solid

x3 Secs

Turn

vehicle ignition OFF

once

the module is successfully programmed.

Pair

remotes (if applicable). For information on how to pair a specific remote, please

refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*

Pair

remotes*

By default, the tachometer is preprogrammed for the vehicle. For instructions on how to
program tach, see page 31.

Initialize

tachometer

* Your aftermarket remote may differ from the model shown in the illustrations.

Directed Digital Solutions MA3

Содержание MA3 2018



































Результаты поиска

Содержание MA3 2018

Отзывы:

Бренды по названию

Популярные бренды

Directed MA3 2018, Руководство по установке

Результаты поиска

Содержание MA3 2018

Отзывы:

Бренды по названию

Популярные бренды