4
© 2019 Directed. All rights reserved.
Use the following steps to manually enter and exit remote start
valet mode:
1
Insert
your key in the ignition
barrel, and
turn
it to the ON
position.
OR
Press
the PTS button once or
twice.*
OR
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
OR
2
Turn
the key to the OFF position.
OR
Press
the PTS button once more.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
OR
3
Immediately
press
and
hold
the control
center button until the parking lights flash 9
times.
Control Center
Button
LED
LED
* The number of times the PTS button is pressed depends on the vehicle.
Check with your installer for the correct number. Make sure you do not
have your foot on the brake pedal during this step.
The parking lights will flash nine times
quickly
when entering
remote start valet mode, and nine times
slowly
when exiting.
Alarm/security valet mode
When alarm/security valet mode is on, system convenience
features such as door locks, parking light flash, and comfort
closure remain functional, while security features (if installed) such
as alarm triggers, confirmation chirps, passive arming, auto re-
arming, and passive starter disable are deactivated.