Installation Type 6
Page 9
Not required in D2D mode.
* If applicable - see the Function List.
Remote
Starter
10
DBALL
Programming button
LED
4
TX
(-) Ground
RX
(+)12v
14
12
2
P#: XKD2D65
(AC) Tach Input
(-) Trunk Status Input*
(-) Door Status Input*
2: Purple/Yellow: J1850
13:Red: (+) 12v
14:Black: (-) Ground
(+) 12v
(-) Ground
IGNITION KEY
BCM
Yellow
Bulb
test
Black or
Orange/Black
White or
Red/White
Bulb test wire coming
from black connector
at the ignition switch.
2: Green/Black: Bulb Test Passlock1 Only
5: Violet/White: (AC) Tach Output
4: Red/Black: (-) Trunk Status Output*
3: Green/White: (-) Door Status Output*
8: Violet/Green: R. Code
9: Violet/Brown: R. Code
(-) GWR (Status)
(+) Ignition 1 Output
(-) Lock Output*
(+) Starter Output
(+) Starter
(-) Unlock Output*
(-) Trunk Release Output
1: Green: (-) Lock Input*
2: Blue: (-) Unlock Input*
3: Red/White: (-)
Trunk Release Input
9: Pink: (+) Ignition Input
8: Violet: (+) Starter Input
10: Blue/White: (-) GWR (Status) Input
Parking Lights
(+) Brake Input
(+) Accessory Output
(+) Ignition 2 Output
RF Loop Connector
Diagnostic connector
OBDII (connector side view)
1
8
16
9
(+) 12 V Input
Ground
Hood Switch
Rev.: 20101103
Platform: DBALL
Firmware: GM5
Vehicle CAN Bus Integration System
© 2010 Directed Electronics. All rights reserved.
The Mobile Integration Systems
