Installation Type 4
Page 7
Not required in D2D mode.
* If applicable - see the Function List.
Remote
Starter
(-) GWR (Status)
(+) Ignition Output
(-) Lock Output*
(+) Starter Output
(-) Unlock Output*
10
DBALL
Programming button
LED
1: Green: (-) Lock Input*
2: Blue: (-) Unlock Input*
9: Pink: (+) Ignition Input
8: Violet: (+) Starter Input
10: Blue/White: (-) GWR (Status) Input
4
TX
(-) Ground
RX
(+)12v
14
12
2
P#: XKD2D65
Hood Switch
(+) 12 V Input
Ground
Parking Lights
Green or Black Connector
located at the ignition switch.
(AC) Tach Input
(-) Door Status Input*
You need to connect these
wires together. These
connections are required for
the module work properly.
Driver Door
Sense Trigger
5: Violet/White: (AC) Tach Output
8: Violet/Green: R. Code (Car Side)
9: Violet/Brown
3: Green/White: (-) Door Status Output*
1: Black/White: RAP OFF
2: Purple/Yellow: J1850
8: Yellow: R. Code (Car Side)
9: Orange/Yellow: R. Code (Key Side)
7: Brown
13: Red: (+) 12v
14: Black: (-) Ground
(+) 12v
(-) Ground
(+) Brake Input
(+) Accessory Output
(+) Ignition Output
White or White/Blue
Key Side
BCM Side
1
2
3
4
5
6
RF Loop Connector
Diagnostic connector
OBDII (connector side view)
1
8
16
9
Rev.: 20101103
Platform: DBALL
Firmware: GM5
Vehicle CAN Bus Integration System
© 2010 Directed Electronics. All rights reserved.
The Mobile Integration Systems
