10
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
To disarm the security system,
turn the ignition to the ON posi-
tion. Press and release the Valet
switch within 10 seconds. The
status LED will stop flashing and
the vehicle should start. If the
vehicle does not start, you may
have waited too long; turn the
ignition off and repeat the
process.
Location of Valet Button_________________________________
audible mode
To temporarily turn on the arm or disarm horn honk(s), simply
press
for less than one second before arming or disarming,
and the confirmation honk(s) will be present for that one oper-
ation only.
valet mode
You can prevent your system from automatically activating the
Failsafe
®
Starter Kill (optional, not included) and locking the
doors by using Valet
®
Mode. This is very useful when washing
the vehicle or having it serviced. In Valet
®
Mode, the starter kill
cannot be activated, even with the transmitter, but all conve-
nience functions (door locks, trunk release, etc.) will continue to
work normally.
➜
➜
DRW-35
