Directed Electronics Clifford 507.4X Скачать руководство пользователя

Страница: 10 / 23

Remote Pairing

Prepare the vehicle system to be Paired with a new remote

Open

a door.

Turn

the key to the ON position.

3. Within 5 seconds

press

and

release

the Control button on the Control Center one time.

4. Within 5 seconds,

press

and

hold

the Control button on the Control Center. The status LED will flash one

time and the siren then chirps to confirm the vehicle is ready for remote pairing.

Release

the Control button and proceed below.

Note:

If no remote pairing results, the system will exit after 60 seconds.

Prepare the LC3 2-way remote control to be Paired with the system:

Remote Pair matches your LC3 remote to the system. Make sure the LC3 remote is set for the desired Car 1

(Default) or Car 2 operation for the system it will be paired with.

Press

and

hold

the

AUX

button for 8 seconds (If Car 2 mode is on, ignore the Car Select beep after 3 sec-

onds) until the main menu appears.

Press

and

release

the

AUX

button until Remote Pair

text is displayed.

Press

and

release

the

AUX

button until

Pair

text is displayed.

Press

and

hold

the

AUX

button until tones are played on the LC3 remote.

5. Successful or Failed Pair: The LC3 remote control indicates a successful or failed pairing on the display.

Prepare the vehicle system to be Paired with the companion or a new 1-way remote as described above.

Note: If no remote pairing results, the system will exit after 60 seconds.

Prepare the companion 1-way remote control to be Paired with the system:

Make sure the remote is set for the desired Car 1 (Default) or Car 2 operation for the system it will be paired

with.

1. Press and hold the

AUX

button for 8 seconds.

Note: If Car 2 mode is on, ignore the Car Select beep after 3 seconds.

2. Wait for the Transmit LED to light solid and the remote to beep. Release the

AUX

button.

3. Press the

AUX

button for 1 second. The transmit LED will blink 3 times and beep 3 times.

4. Within 5 seconds, press the

AUX

button.

5. The vehicle siren will chirp. You have now successfully learned the remote to the vehicle remote start and

security system.

6. Press the

AUX

button two times to exit learn routine on the remote. The transmit LED will turn off and exit

tone will sound.

Содержание Clifford 507.4X
























Результаты поиска

Содержание Clifford 507.4X

Отзывы:

Похожие инструкции для Clifford 507.4X

Бренды по названию

Популярные бренды

Directed Electronics Clifford 507.4X, Руководство по установке

Результаты поиска

Содержание Clifford 507.4X

Отзывы:

Похожие инструкции для Clifford 507.4X

Бренды по названию

Популярные бренды