Directed Electronics Automate 210D, Руководство по установке владельца

Страница: 38 / 55

35
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
d diia ag gn no ossttiic css
The microprocessor at the heart of your system has the ability to
constantly monitor all of the switches and sensors connected to
it. It can detect any faulty switches or sensors and prevent them
from disabling the entire system. It can also record and report
any triggers that occur when you are away from your vehicle.
arming diagnostics
If the system is armed at the same time that an input is active
(door opening, sensor triggering, etc.), you will hear one chirp
to indicate arming and a second chirp a few seconds later to
indicate Bypass Notification.
A Bypass Notification chirp means that the system ignores the
input that was active when the system was armed, until that
input ceases. Three seconds after that input ceases, the system
will resume normal monitoring.
For example, if your vehicle has an interior light exit delay and
you arm the system before the light turns off, you may hear a
Bypass Notification chirp. Three seconds after the light turns
off, however, normal monitoring resumes.
n noottee:: Bypass Notification does not occur when the sys-
tem is in Silent Mode™ or if the chirps have been pro-
grammed not to sound.
➜