Directed Electronics 1400XP Скачать руководство пользователя

Страница: 33 / 47

operating settings learn routine

The System Features Learn Routine™ dictates how the unit operates. Due to the number of features, the

features have been divided into two menus. It is possible to access and change any of the feature set-

tings using the Valet®/Program switch. However, this process can be greatly simplified by using the Bitwriter™.

Any of the settings can be changed and then assigned to one of up to four transmitters, a feature called Owner

Recognition. Each time that particular transmitter is used to disarm the system, the assigned feature settings will

be recalled. Owner Recognition is only possible when programming the unit via the Bitwriter.

The learn routine may be locked if previously programmed using the Bitwriter. If the horn generates one

long honk when attempting to program the unit, the learn routine is locked and must be unlocked using

the Bitwriter™ before proceeding.

To program the features using the Valet switch:

Key.

Turn the ignition on and then back off.

Select Menu.

Press and

HOLD

the Valet®/Program switch. When the LED flashes once and

the horn honks Menu One has been selected. Continue to hold the switch until the LED

flashes twice and the horn honks twice Menu Two has now been selected. Release the

switch after the Menu choice has been selected.

Choose.

Within 10 seconds, press and release the Valet®/Program switch the number of

times corresponding to the feature number you want to program and then press and hold

the switch. (See

Feature Menus

After a second, the LED will flash to indicate which feature you have accessed. For example, in Menu Two, groups

of eight flashes would indicate access to the activation pulse setting (Feature 2-8). The horn will also honk eight

times (if connected).

Transmit.

The transmitter is used to select the desired setting. Pressing

will change

the feature to the LED ON setting (or will flash once for features with more than 2 set-

tings). The horn will honk once (if connected). Pressing

will change the setting to

the LED OFF setting (or will flash two or more times for features with more than 2 settings).

Release.

The Valet®/Program switch can now tbe released.

You can advance from feature to feature by pressing and releasing the Valet®/Program switch the number of times

Содержание 1400XP
















































Результаты поиска

Содержание 1400XP

Отзывы:

Похожие инструкции для 1400XP

Бренды по названию

Популярные бренды

Directed Electronics 1400XP, Руководство по установке

Результаты поиска

Содержание 1400XP

Отзывы:

Похожие инструкции для 1400XP

Бренды по названию

Популярные бренды