Directed Audio 2500, Руководство пользователя

Страница: 9 / 12

9
© 2002 Directed Electronics, Inc
FIGURE 2—CONTROL PANEL
volume of the system and affects all
line level outputs to the amplifiers.
FFaaddeerr - To set the master volume/
fader control knob to the fader posi-
tion, pull gently on it until a notched
position is reached. It will then
control the front-to-rear balance of
the front and rear RCA output jacks.
W WAARRIINNGG!! DO NOT use excessive force when using this knob
or damage to its release mechanism may result.
2. PPoow weerr OOnn//OOffff LLEEDD - This LED will
be illuminated when the 2500 is
on.
3. IInnppuutt SSoouurrccee SSw
wiittcchh - The input
source switch selects between
Source 1 and Source 2 inputs.
4 SSuubbw wooooffeerr VVoolluum mee CCoonnttrrooll: The
subwoofer volume control knob
controls the volume of the dedi-
cated subwoofer output.
5. SSuubbw
wooooffeerr FFrreeqquueennccyy CCoonnttrrooll - The
subwoofer frequence control knob
controls the low-pass crossover
frequency for the dedicated
subwoofer output between 30-
300Hz at 12dB/octave.
6. FFrreeqquueennccyy CCoonnttrroollss - The frequency
control knobs control the gains for
their respective frequencies. The
center position is flat with a
m18dB and -18dB
adjustment capability.
1 6 5 4 2 3