Type 5
without
OEM alarm
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram (
).
16
8
9
1
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
C-CAN High: pin 6
C-CAN Low: pin 14
FT CAN High: Orange/Green: 7
FT CAN Low: Orange/Brown: 8
9: Black: (-) Ground
10: Red: (+) 12V Input
B-CAN Wires
See the Vehicle wiring reference
charts for the connector, pin and
wire color in your vehicle.
Refer to the Vehicle wiring
reference charts for wire
and connector details
related to the standard
connections in the vehicle.
OBDII Diagnostic
(connector side view)
(-) Hood Input: Gray: 3
Hood Pin
Siren
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(+) Siren Output: Brown: 17
EMS COM Data (connector side): Yellow/Black: 2
EMS COM Data (vehicle side): Orange/Black: 3
11: Orange/Yellow: EMS COM Data
(vehicle side)
6: Yellow: EMS COM Data
(connector side)
(-) Hatch Release / Power Liftgate: Red/White: 9
(-) Lock Output: Dk. Green: 15
(-) Unlock Output: Dk. Blue: 7
(+) Brake Input: Brown/White: 16
7 White
4 White
8 thick-gauge wir
es
MC501
(-) Parking Light Output: Green/Black: 10
OR
1 - MC21, Green 18-pin connector
18
2 - EM11, Black or White 46-pin connector
15
Connector
EMS COM connections are only needed
if the vehicle has a transponder/immobilizer.
Refer to the Vehicle wiring reference charts section for
the connector, pin and wire color in your specific vehicle.
Cut
Ignition switch
(6-pin connector)
(+) Ignition Output:
Pink
(+) 12V Input: Red
(+) 12V:
Red,
pin 1
(+) Accessory: Blue, pin 2
(+) Starter: Green, pin 3
(+) Ignition: Orange, pin 4
(+) Accessory Output:
Orange
(+) 12V Input: Red
(+) Starter Output
(to starter): Violet
Starter Input (from
key switch): Green
C-CAN wires MUST be
connected for proper
operation.
21
Directed Digital Solutions HKHT1
© 2020-03-03 Directed. All rights reserved.
