8
Power Recliner Setup and Operation
NOTE:
Motor cable
(A)
is bundled underneath the back of the chair and must be
removed from the bundle prior to use. To easily access motor cable
(A)
, tip the chair
forward to expose the underside of the chair. Once motor cable
(A)
is removed from
the bundle, slowly tip the chair back to its normal upright position.
SETUP:
1. Plug motor cable
(A)
into transformer
(B)
2. Plug power transformer cable
(C)
into transformer
(B)
3. Plug power transformer cable
(C)
into standard 120V wall outlet
•
WARNINGS
• Be sure to keep transformer
(B)
a minimum of 3' away from the chair at all times.
• Do not locate transformer
(B)
underneath the product.
• Do not mount or attach the transformer
(B)
to the product.
• Do not push excess cable underneath product.
OPERATION
:
Press the buttons on the power recliner remote to operate the recliner
(D)
. To disable
the recliner, remove the transformer
(B)
by first unplugging the power transformer
cable
(C)
from the wall outlet, then unplug the motor cable
(A)
from the transformer
(B)
.
Finally, remove transformer
(B)
and power cable
(C)
and store out of reach of residents.
Failure to do so may result in injury.
Directions for Use
(cont.)
3 FEET
Wall Outlet
Power
Transformer
Cable
(C)
Transformer
(B)
Motor Cable
(A)
NOTE:
Motor cable
(A)
is bundled
underneath the back panel of chair
and MUST be unravelled before use.
Power Recline
Remote
(D)
3 FEET
Wall Outlet
Power
Transformer
Cable
(C)
Transformer
(B)
Motor Cable
(A)
NOTE:
Motor cable
(A)
is bundled
underneath the back panel of chair
and MUST be unravelled before use.
Power Recline
Remote
(D)
