1-800-634-7328
■
directsupply.com
17
• On/Off Switch and Intensity Control: If both controls are
in the off-position (white markings on the housing), the
device is switched off. By turning the controls clockwise,
the appropriate channel is switched on and the impulse
display led will illuminate and begin to pulse according
to the frequency set. The current strength of the impulses
transmitted to the electrodes increases further when the
control is turned clockwise. To reduce the current strength
or switch the device off, turn the controls counter clockwise
to the required setting or “Off” position.
• Lead Connector: Connection of the electrodes is made with a
two-lead connector. The device must be switched off before
connecting the cables. Both intensity controls must be at the
“Off” position. Electrodes must be pressed firmly on the skin.
PLUG
LEAD CONNECTOR
Turn Power On
Adjust Intensity
Turn
Power Off
