1-800-634-7328
■
directsupply.com
13
protocols, as long as 36 hours. In general, pain relief will
diminish within 30 minutes of the cessation of stimulation.
Attachment of Electrode Lead Wires:
The wires provided with the device
insert into the jack sockets located
on top of the device. Holding the
insulated portion of the connector,
push the plug end of the wire into
one of the jacks (see drawing); one
or two sets of wires may be used.
After connecting the wires to the stimulator, attach each
wire to an electrode. Use care when you plug and unplug
the wires. Jerking the wire instead of holding the insulated
connector body may cause wire breakage.
•
CAUTION: Do not insert the plug of the patient lead wire
into the AC power supply socket.
Electrode Options
The electrodes are disposable and should be routinely
replaced when they start to lose their adhesive nature. If you
are unsure of your electrode adhesive properties, discard
the existing electrodes and order replacement electrodes.
Replacement electrodes should be re-ordered through or on
the advice of a licensed healthcare professional to ensure
proper quality. Follow application procedures outlined in
electrode packing, to maintain optimal stimulation and to
prevent skin irritation.
Electrode Placement
The placement of electrodes can be one of the most important
parameters in achieving success with TENS therapy. Of utmost
importance is the willingness of the clinician to try the various
styles of electrode placement to find which method best fits
