USER MANUAL
Direct Power 400/600/1000
Uninterruptible Power System
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions for models Direct
Power 400/600/1000 that should be followed during installation
and maintenance of the UPS and batteries.
Safety
– CAUTION!
This product is specially designed for PCs and it is not
recommended for use in any life-supporting system and other
specific important equipment.
This equipment can be operated by any individual with no previous
training.
Do not plug household appliances such as hair dryers to UPS
receptacles.
This unit intended for installation in a controlled environment
(temperature
controlled,
indoor
area
free
of
conductive
contaminants). Avoid installing the UPS in locations where there is
standing or running water, or excessive humidity.
CAUTION: Risk of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified service
personnel.
The utility power outlet shall be near the equipment and easily
accessible. To isolate UPS from AC input, remove the plug from the
utility power outlet.
If UPS is to be stored for a long time, it is recommended to recharge
the batteries (by connecting the utility power to UPS, switch
“ON”),
once a month for 24 hours to avoid a full battery discharge.
Please do not use the UPS in excess of the rated load capacity.
The UPS contains one/two large-capacity batteries. So the shell
shall not be opened, otherwise such dangers as electric shock will
be caused. If any internal overhaul or replacement of the battery is
required, please contact the distributor.
The internal short circuiting of the UPS will lead to dangers such
as electric shock or fire, therefore, no water containers (such as
a water glass) shall be placed on the top of the UPS so as to
avoid such dangers as electric shock.
Do not dispose of battery or batteries in a fire. The battery
may explode.
Do not open or mutilate the battery or batteries. Released
electrolyte is harmful to the skin and eyes. It may be toxic.
Φ
on the rating label stands for phase symbol.
A battery can present a risk of electrical shock and high short
circuit current. The following precautions should be observed
when working on batteries :
1)
Remove watches, rings, or other metal objects from the
hand.
2)
Use tools with insulated handles.
Servicing of batteries should be performed or supervised by
personnel knowledgeable of batteries and the required
precautions. Keep unauthorized personnel away from
batteries.
When replacing batteries, replace with the same type and
number of the sealed lead-acid batteries.
The maximum ambient temperature rating is 40
℃
.
This pluggable type A equipment with battery already installed by
the supplier is operator installable and may be operated by
laymen.
During the installation of this equipment it should be assured that
the sum of the leakage currents of the UPS and the connected
loads does not exceed 3.5mA.
Attention, hazardous through electric shock. Also with
disconnection of this unit from the mains, hazardous voltage still
may be accessible through supply from battery. The battery
supply should be therefore disconnected in the plus and minus
pole of the battery when maintenance or service work inside the
UPS is necessary.
The mains socket outlet that supplies the UPS shall be installed
near the UPS and shall be easily accessible.
In case smoke is found coming out from the device, please cut off the
power supply quickly and contact the distributor.
Do not keep or use this product in any of the following environments:
Any area with combustible gas, corrosive substance or heavy
dust.
Any area with extraordinarily high or low temperature (above
40
˚C or below 0˚C) and humidity of more than 90%.
Any area exposed to direct sunshine or near any heating
apparatus.
Any area with serious vibrations.
Outdoor.
In the event that there is fire occurring in the vicinity, please use
dry-power extinguishers. The use of liquid extinguishers may give
rise to the danger of electric shock.
1. System Description
Front panel:
1.
Power Switch
2.
UPS status Indicator
–
AC Mode: Green lighting
Battery Mode: Green flashing
3. Fault LED: Red flashing
Back Panel:
1. Output receptacles
2. Fuse
3. AC Input
4. Coaxial Connector (Option)
5. phone system, computer, monitor against surges and
spikesSurge Protection (Option)
UPS
20-3MAXPO0180
