Direct IP IDIS DP-DE2108, Руководство по эксплуатации

Страница: 28 / 36

Part 2 - Remote Setup
28
• Motion Ignoring Interval : With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
•
Daytime
: Specify when daytime starts and ends. All
other times will be assumed as nighttime.
• Event Action : Select a trip zone event alert action.
-
Send Email
: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The encoder must be registered to the remote
system in order to use the
Remote Callback
feature.
Event Action
settings must be configured correctly
in order to perform event actions.
Tampering
Select
Tampering
to configure tampering detection
event settings. With tampering detection event enabled,
a sudden change in the video will be assumed as an
event.
•
Sensitivity
: Define the tampering detection
sensitivity. Higher values will result in more sensitive
detection.
•
Activation time
: Specify how long tampering has
to be detected for it to be considered as an event.
Tampering detections that do not last for the
specified duration of time will not be considered as
events.
• Use Ignoring Time : Define the event ignoring time.
Tampering detections taking place during the defined
time range will not be assumed as events.
• Event Action : Select a tampering detection event
alert action.
- Send Email : Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback : Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The encoder must be registered to the remote
system in order to use the
Remote Callback
feature.
Event Action settings must be configured
correctly in order to perform event actions.