Direct IP IDIS DC-T4537HRXA, Руководство по эксплуатации

Страница: 16 / 49

Part 1 - Remote Setup
16
Camera
Image Sensor
Configure
Image Sensor
settings.
•
Mode:
Choose resolution. 16:9 for 4M and 4:3 for 5M.
When changing sensor mode, some settings will be
reset to default.
•
Frame Rate
: Set the frame rate of image sesor.
Streaming settings are reset when changing the
frame rate.
Streaming
settings are reset when changing the
frame rate.
•
Mirroring
: Select Horizontal Reverse or Vertical
Reverse to flip the image horizontally or vertically.
•
Pivot
: Select a direction to rotate images 90 degrees
clockwise or counterclockwise. If you enable this
function, you can monitor more efficiently long and
narrow space such as hallways, corridors, etc. If both
Mirroring and Pivot functions are enabled, Mirroring
functions first, then Pivot.
With Pivot used, 3840x2160 resolution and
maximum IPS using 30ips are limited.
• Defog: Disables or enables the Defog feature. When it
is enabled, image with a fog is adjusted.
• 3DNR: Set the strength of 3DNR (3D Noise Reduction).
A higher 3DNR value reduces background noise in a
low-light environment, but it may cause afterimage
(lag) of moving objects.
White Balance
Configure
White Balance
settings.
• Preset : Use preconfigured white balance settings.
-
Auto
: Allow the system to adjust the white
balance automatically. The system will assess the
lighting conditions and adjust the white balance
automatically.
-
Hold:
Hold the current white balance.
- INCANDESCENT - FLUORESCENT COLD : Select
a lighting type to apply the appropriate white
balance.
If the
Preset
is
Hold
and the WDR mode is changed,
a reset is required.
•
Manual
: Adjust the white balance manually. Adjust
Red and Blue gain values. Greater the value, greater
the intensity of the corresponding color.
If the white balance does not work properly under the
following specific conditions, select
Manual or Hold.
- When the surrounding environment of the object is
out of the color temperature correction range
- When the surrounding environment of the object is
dark
- The camera is pointed directly at the fluorescent lamp
or installed in a place where the lighting change is
severe.