D I R E C T H E A L T H C A R E S E R V I C E S . C O . U K
U S E R M A N U A L
1 3
5. Cleaning
Before the cleaning and disinfection procedure, please use hygienic hand disinfection with an alcoholic skin disinfectant.
To protect clothing, use plastic apron, face mask and gloves.
Infection Control and routine cleaning must be carried out in accordance with your local Infection Control Policy. It is suggested that
all disinfection be done with a high grade disinfectant in accordance with manufacturer’s instructions.
Use authorised cleaning and disinfection solutions only!
The working table and the system must be cleaned and disinfected.
Concentration and exposure time of the solutions must be noted!
The top cover seams are sealed to prevent moisture ingress and bacterial growth in the seam stitching.
Do not use high temperature autoclave, or use Phenolic based products for cleaning.
It is recommended the system is cleaned between patients and approximately every two weeks if in constant use.
Refer to the cleaning and disinfection information for the Air Pro-Plus system for additional guidance.
In case of questions in hygiene please contact an authorised local Direct Healthcare distributor.
Mattress Base
Wipe down the outside shell with authorised cleaning and disinfection solutions, ensuring that all surfaces come in contact with the
disinfectant. Rinse off well with a clean damp cloth and air dry. Should Air Cells require disinfecting, disconnect.
Air Cells from the base by unfastening the press studs at each end and disconnecting air pipes from main air hoses before sliding
each cell out from the cell straps. Swab with authorised cleaning and disinfection solutions. Dry thoroughly with a soft cloth before
refastening.
Do not machine wash or dry the Air Cells or Mattress base.
Do not disassemble the Mattress unless cleaning is required. If cleaning or disinfecting is required, do not disconnect the pipes
from individual Air Cells.
