4
M A N U A L
EN - Please read the instructions before you start using this product
Please keep the user instructions for future reference.
Purpose
The shower bench is for use in a bathroom environment, eg., in a showering situation or for placement in front of a
washbasin. The shower bench has extra high side handles.
Assembling – see drawing, page 10
The loose legs are mounted in the frame and secured with the snaplock clips. Make sure the clips are properly inserted
in the leg holes. The seat is pressed onto the seat frame, with the 4 teats securely inserted in the 4 holes.
Check the correct position of the seat before use.
Adjustment – see drawing, page 10
The shower bench can be height adjusted in 8 different positions by the use of snaplock clip. Remove the snaplock clip
on the legs, choose the new height position and replace the snaplock clip. Before use, make sure that all 4 legs have the
same height and that the snaplock clips are properly inserted in the leg tubing. The rear legs can be height adjusted to
slope the seat forwards, however, not more than max. 2 holes difference to the front legs.
Maintenance
We recommend that the shower bench be wiped after use. Clean with regular domestic cleaning agents without abrasive
or corrosive properties. We advise against using acidic or chlorine based cleaning agents on the seat as this can cause
discolouration to the polyurethane material. Polyurethane can tolerate temperatures up to 85 ºC / 3 minutes.
Caution!
•
Max weight load. 300 kg.
•
Should be placed against a wall for optimal safety.
•
Use the product only as instructed in the section ”Purpose”.
•
Do not stand on the shower bench.
•
Do not lift the shower bench when the user is seated on it.
•
Do not push or pull the shower bench across the floor when the user is seated on it.
•
For optimal safety, regularly check the condition of the rubber ferrules and replace if necessary.
•
For optimal safety, regularly check the condition and correct placement of the snaplock clips.
•
Check that the snaplock clips are correctly inserted in the tubing before using the shower bench.
•
Height adjustment of the rear legs should be max. 2 holes difference to the front legs.
Содержание Linido 200550313
Страница 11: ...11 M A N U A L...
