Page | 25
©Direct Connection RC
43.
Give the fuselage a final sanding. Set aside for covering.
44.
Sand the triangle fins and cover as desired.
45.
Cover the fuselage and wing separately before adhere the fuselage to the wing. Ensure the
necessary slots are cut out to attach the triangle fins.
46.
Add decals as desired. We provide two orange and two white finishing decals along with the
Eclipse logo. Decals can be difficult for even an experienced builder we recommend using
transfer tape to apply our decals and where possible an extra set of hands.
47.
Install the motor, electronic speed controller, servos, servo horns or magnets to attach the
battery compartment, and all other necessary items.
For glow planes install your throttle servo and flight battery. Your fuel tank should already be
installed.
