DIR Prime 5510, Инструкция по эксплуатации

Страница: 13 / 20

13
DIR
www.dirgroup.co.uk
ASSEMBLY INSTRUCTIONS
(1) (2)
3
Caution
(2).Put the installation hole of the electro-motional rod in the backrest in order with the seat hole of the electro-motional rod
in the backrest.and then insert the peg
(1). The correct method of operation: before operating the controller, please make sure that the backrest electronic cylinder
is connected well with the pin that fixes the backrest.
(2). When the backrest electric cylinder is not connected with the pin that fixes the backrest, please hold the electronic
cylinder in case it touches the ground when operate the controller.
(3). When debugging and installation, before operating the controller, please make sure that the backrest electric cylinder is
connected well with the pin that fixes the backrest. Otherwise, after shutting down the switch, the front part of the electronic
cylinder will hit the board under the seat frame to cause bad distortion of the seat frame, and even make the rail go out of
the railway or damage the steel-ball railway.