CONTROL PANEL (cont’d)
POWER PAD
Oven automatically cooks at high power. For a
lower power level, set cook time, touch POWER
and enter number (1-9) for desired power level.
TIMER PAD
Independent kitchen timer. Set any time, even
while oven is operating. Touch TIMER pad, set
time then START. Touch RESET to cancel.
COOK PAD
Cook at one power level for a period of time, then
automatically switch to another power level for the
remaining cook time.
COOK BY WEIGHT
Touch COOK BY WEIGHT pad, enter weight of
meat accurately, then START. After partial cooking,
oven stops, leaving time on display. Turn over meat
when oven stops after partial cooking. Re-touch
START to finish.
DEFROST BY WEIGHT
Automatic defrosting for large meats. Controls power
level to thaw without excessive outside warming.
SPEED DEFROST
Automatically programs lower power levels for even
defrosting. Touch SPEED DEFROST, set time and
START.
CLOCK
Touch pad once, touch number pads and then
CLOCK to set the clock
RESET
Touch to clear display of unused time after cooking,
also cancels the timer.
START/STOP PAD
Touch as final step in setting oven. Touch to stop
microwaving while oven is in operation (re-touch to
continue timing shown on display). Will not stop timer.
OPERATING INSTRUCTIONS
1. SETTING THE CLOCK
A. Setting the clock when the oven is plugged in.
- When the oven is first plugged into a wall outlet,
touch the CLOCK pad once, the display will show
“ENTER CLOCK TIME”.
- Enter the correct time of day by touching the
correct number pads. You must select at least 3
digits (one for hour(s) and two for minutes). For
minute less than 10, precede the minutes digit
with a 0 (ex. 5 minutes past two, set 2:05). The
colon (:) will flash between hour and minute digits.
If you prefer not to have the clock displayed, set
the clock for 00:00 and the display will only show
a colon.
- Touch CLOCK to lock in the time. Colon will stop
flashing and clock will begin to keep current time.
After clock has been set, the word prompt clock
will always show on the display unless oven is in
a cooking operation.
B. Changing the clock time.
- Touch the CLOCK pad once, the display will
show “ENTER CLOCK TIME”.
- Enter the correct time of day by touching the
correct number pads. Remember to set at least 3
digits (one for hour(s), two for minutes), and
precede minutes under 10 with a 0.
- Touch CLOCK to lock in the time. Colon will stop
flasing and begin to keep current time.
C. Notes on setting the clock.
- If you make a mistake in setting the time, start
over by pressing the CLOCK pad twice.
- To recall time of day while you are cooking,
press the CLOCK pad. Time will be displayed for
3 seconds before returning to countdown of
cooking time.
- In case of power failure, when the power is
restored, the control will be in a clock set mode.
Follow directions for setting the clock.
7
