Dionex ICS-90, Руководство по установке

Страница: 16 / 40

ICS-90 Installation Instructions
12
Doc. 031856-03 12/06
To connect the ICS-90 directly to the PC:
1. Locate the USB cable (P/N 960777) provided in the ICS-90 Ship Kit
(P/N 059947).
2. Plug the “A” connector of the USB cable into the USB port on the PC
(see Figure 2-5 ).
3. Plug the “B” connector of the USB cable into the USB receptacle on
the ICS-90 rear panel (see Figure 2-5 ).
Figure 2-5. Example Connections: One ICS-90 Connected to the Computer
USB Cable
(P/N 960777)
A
B
Plug the “B”
into the USB
receptacle on the ICS-90.
USB cable’s
connector
Plug the “A”
into USB
port on the PC.
USB cable’s
connector the
ICS-90
PC
To connect the ICS-90 to an external hub (P/N 060392):
The ICS-90 Ship Kit (P/N 059947) includes one USB cable
(P/N 960777). You must order another USB cable for this configuration.
The USB standard limits the USB cable length to 5 m (5.5 yds). Each
USB device can be separated from the PC by no more than five hubs.
Thus, each USB device can be located no more than 30 m (32 yds)
from the PC.
Carefully secure all USB cables, the external hub, and the hub power
cable so that they cannot be accidentally disconnected.
1. Plug the “A” connector of a USB cable into a port on the external
USB hub (see Figure 2-6 ).
2. Plug the “B” connector of the cable into the USB receptacle on the
ICS-90 rear panel (see Figure 2-6 ).