LOCO-V2 DAC-AMP
The LOCO-V2 DAC-AMP is a HAT board for the Raspberry Pi 2/3 model B. It provide a high
resolution DA converter and a class D power amplifier. Together with a Raspberry Pi it is your
complete solution for a media player or music streamer with outstanding sound quality. All you
need is to connect a power supply and to wire up your loudspeakers!
Specifications:
•
HAT board, compatible with Raspberry Pi 2/3 model B.
•
No need to install drivers, the Raspberry Pi will detect the LOCO automatically.
•
i2s audio from the Raspberry Pi up 32 bit/ 384 kHz.
•
Bit perfect DA converter up to 32 Bit/384 kHz.
•
Hardware volume control via ALSA, so there is no loss in bit-depth.
•
Fully symmetrical signal path for low distortion.
•
<0,005% THD+N at 1 watt/4 ohm.
•
SNR (A Weighted) >111 dB (LS output).
•
DC Power supply from 19 V to 35 V.
•
Back power up to 3 A for the Raspberry Pi.
•
Up to 153 Watt/4 ohm.
•
Fully protected against faults with short-circuit protection, and thermal protection as
well as over-voltage, under-voltage, and DC protection.
•
High quality components like low ESR capacitors, fully shielded coils and low noise
regulators.
•
Fully tested for functions and reliability.
•
Designed and hand assembled in the Netherlands.
