DioLuce, LLC 185 Main St. #4230300 New Britain, CT 06051
www.dioluce.com
7
9.
Hang the light fixture on the side bracket closest to the DC wire connection,
using the hanging brackets.
10.
Connect the DC wiring from the light fixture to the DC wiring on the power supply
for each LED light bar.
11.
If the option for Motion Sensor and Daylight Sensor are selected, the CDS Sensor
will be factory mounted in the Functional CDS Sensor Position and connected to
the power supply. Otherwise it will be shipped loose to be mounted to the inside
of the existing housing. Connect the CDS Sensor to the power supply connector
next to the dip switches and mount the CDS Sensor next to the power supply
using the adhesive strip provided.
Important! The CDS Sensor must be connected in order for the circuitry to
function properly in conjunction with the Dip Switch Configuration, even though
daylight and motion sensor functionality are not required.
