DioLuce, LLC 185 Main St. #4230300 New Britain, CT 06051
www.dioluce.com
6
6.
Mount the DioLuce power supply up into the housing within reach of the
incoming power wires using the provided self-drilling and tapping screws. (see
warning note 4)
7.
Connect the incoming power to the power supply according to the electrical
connection wiring diagram.
8.
Peel the double sided tape and mount the side bracket at each end of the
housing using the self-drilling and tapping screws. Center the bracket and
ensure the flanges are resting up against the T frame as shown in the picture
below. (see warning note 4)
