3 OF 3
®
Toll Free: 877.817.6028 | Fax: 415.592.1596 | www.DiodeLED.com | [email protected]
© 2019 Elemental LED, Inc. All rights reserved. Specifications are subject to change without notice.
IG070319-2.0
TOUCHDIAL
™
Mini Remote Dimmer INSTALL GUIDE
TOUCHDIAL
™
Mini Remote Dimmer
INSTALLATION GUIDE
MOUNTING
1. Place Base Mount on
surface where desired,
ensuring it is level.
2. Screw Mount to surface
using included Screws.
3. Place Remote into
Mount.
Symptom
Common Cause
Control won’t
function
• Check for dead batteries.
• Remote must be turned on for
operation.
Master receiver
does not sync
with remote
• Ensure function is set to MASTER
(1 pin) - See Syncing Note or
TOUCHDIAL Receiver Installation
Guide.
• If still not syncing do following: 1)
Turn off main power to receiver and
turn back on. 2) Reset receiver by
long pressing LEARNING KEY for 5
seconds until LED flashes. 3) Re-sync
receiver to control.
TROUBLESHOOTING
See TOUCHDIAL Receiver Install Guide for more troubleshooting tips.
TOUCHDIAL MINI REMOTE DIMMER SPEC SHEET
F
or full specifications.
TOUCHDIAL RECEIVER SPEC SHEET & INSTALL
GUIDE
F
or full specifications and installation instructions.
ADDITIONAL RESOURCES
1. Place Remote and Base
onto a metal surface.
The included Magnet
will hold the Dimmer in
place.
MAGNETIC MOUNT
SCREW MOUNT
a
b
