3 OF 8
IG082119-9.0
NEON BLAZE
™
24V LED Strip Light
INSTALLATION GUIDE
NEON BLAZE
™
24V LED Strip Light
INSTALLATION GUIDE
INSTALLATION
TURN POWER OFF AT CIRCUIT
BREAKER
SHOCK HAZARD!
May result in serious
injury or death.
Turn power OFF at circuit breaker prior to
installation
.
CREATE CONNECTION
PREPARE NEON BLAZE
™
LED STRIP
FOR INSTALLATION
Before cutting or attaching connectors, ensure that the
arrows on the underside of the Strip Light point away
from initial connection.
Skip to 3.3 if not cutting to specific length.
If cutting to length, ensure to cut the Strip Light at
the designated cut points only. Cutting anywhere
else will cause damage to the Strip Light.
24V DC
24V DC
1
3
2
Blade
Strip Light
Clear Plastic Element
Insert spacer directly
over
LED Strip Light allowing
each arm of spacer to slide next to first LED.
Spacer must be used to maintain warranty.
*Top bending BLAZE
™
NEON LED Strip Light
shown.
INSERT SPACER
3.1
2.1
2.2
TOP BENDING CONNECTOR
SIDE BENDING CONNECTOR
Slide blades of connector directly between LED Strip
Light and clear plastic element, then press firmly.
INSERT CONNECTOR
3.2
-
+
-
+
-
+
-
+
Note: Failure to follow installation instructions may void warranty.
