4 OF 6
IG041519-4.0
NEON BLAZE
™
RGB 24V LED Strip Light
INSTALLATION GUIDE
NEON BLAZE
™
RGB 24V LED Strip Light
INSTALLATION GUIDE
INSTALLATION (CONT.)
*Side emitting NEON BLAZE
™
RGB
LED Strip
Light
ATTACH DRIVER AND LIGHTING
CONTROL.
Verify a compatible driver is installed. Utilize
applicable wiring when installing outdoors. (Use of
wet location-rated junction box recommended)
TROUBLESHOOTING
TOOLS & RESOURCES
NEON BLAZE
™
RGB SPECIFICATION SHEET
For full specifications.
TURN POWER ON AT CIRCUIT BREAKER
Shift in
brightness
• Ensure an appropriate gauge of
wire is installed between strip light
and LED driver.
See VOLTAGE
DROP CHARTS.
Some LEDs
are not
functional
• Ensure strip light has not been bent
excessively, which could damage
circuitry.
• Ensure strip light has not been
submerged in any liquid for any
amount of time.
Lights are
flickering
• Ensure a compatible driver and/or
dimming control is installed. Check
for loose connections.
Lights are
turning on/off
repeatedly
• Ensure driver is not overloaded. An
overloaded driver will trip the internal
auto-reset (of driver) repeatedly,
turning the system on/off.
NEON BLAZE
™
RGB LED Strip Light may be bent to resemble
neon lighting. Examples below:
Side emitting NEON BLAZE
™
RGB LED Strip Light may be bent
“Left and Right” on the horizontal axis of the Strip Light.
6
5
CONNECT TO 96” EXTENSION CABLE
NEON BLAZE
™
RGB
Extension Cable.
Screw connector cap onto extension cable securely.
7
