4 OF 7
IG050619-3.0
HYDROLUME
®
SLIM RGB LED STRIP LIGHT
INSTALLATION GUIDE
HYDROLUME
®
SLIM RGB LED Strip Light
INSTALLATION GUIDE
MOUNT HYDROLUME
®
SLIM RGB LED
STRIP LIGHT TO SURFACE
See mounting options a & b (below).
Mark placement for HYDROLUME
®
SLIM Mounting
Brackets -- roughly 12 inches apart. Fasten brackets
with M2.9 (#4) screw or similar size (not provided).
Once mounted, fasten HYDROLUME
®
SLIM RGB
LED Strip Light to brackets.
HYDROLUME
®
SLIM MOUNTING BRACKETS
Mount channel to desired surface using minimum 2x
M2.9 (#4) screws or similar size (not provided). Once
channel is mounted, firmly press HYDROLUME
®
SLIM RGB LED Strip Light into channel pressing one
end to the other.
HYDROLUME
®
SLIM MOUNTING CHANNEL
ATTACH CONTROL AND DRIVER
Ensure all polarities are correct and connections
are secure.
TURN POWER ON AT CIRCUIT BREAKER
a
b
INSTALLATION (2108) (CONT.)
Verify compatible driver is installed. Utilize
applicable wiring when installing outdoors. (Use of
wet location-rated junction box recommended)
REVIEW SYSTEM
3
5
6
4
1
TURN POWER OFF AT CIRCUIT BREAKER
SHOCK HAZARD!
May result in serious injury or death.
Turn power OFF at circuit breaker prior to installalation.
NEC 680
When installing in water, install in accordance with NEC 680. Per UL
instructions It is required to mount strip light with HYDROLUME
Mounting Channel (DI-HL-MTCH) for these applications.
INSTALLATION: UL LISTED 676 MODELS
FOR POOL/SPA APPLICATIONS
For other appplications that are not in a pool or spa, see
INSTALLATION -
UL LISTED 2108 MODELS.
INSTALLATION (676)
