3 OF 5
IG050421-2.0
DMX ZONE CONTROLLER
INSTALLATION GUIDE
PINOUT CONNECTION GUIDE
SETTING DMX ADDRESS
Each DMX decoder or DMX luminaire needs to be addressed correctly so the controller
can communicate to each decoder. To pair a DMX decoder or luminaire to the controller,
set each decoder/luminaire to the following address:
•
Set to address ‘001’ (will be fixed to address 001 – 002)
The controller is fixed with 2 DMX addresses to control the 2 channels:
CH1 – Warm White, CH2 – Cool White.
Example of DMX Addressing Display
Digital Display
The following diagrams/tables indicate the appropriate connections for patching your own CAT5/RJ45, and XLR-3 splice cables. These diagrams
are for general reference and may slightly differ between different cable manufacturers.
1 2 3 4 5 6 7 8
Pin No.
Wire Color
Function
1
White/Orange
Data +
2
Orange
Data -
3
White/Green
None
4
Blue
None
5
White/Blue
None
6
Green
None
7
White/Brown
May be used as 2nd ground
8
Brown
Ground
Pin No.
Function
1
Ground
2
Data -
3
Data +
Once DMX address is set on luminaire or DMX decoder, ensure to Press Zone 1, 2, or 3 on the controller to control desired zone.
