6 OF 8
IG121620-3.0
AlphaTECH
®
LED Strip Light
INSTALLATION GUIDE
AlphaTECH
®
LED STRIP LIGHT
INSTALLATION GUIDE
TROUBLESHOOTING
TOOLS & RESOURCES
AlphaTECH
®
SPECIFICATION SHEET
For full specifications.
Shift in
brightness
and/or kelvin
• Ensure an appropriate gauge of
wire is installed between strip light
and LED driver.
See VOLTAGE
DROP CHARTS.
Some LEDs
are not
functional
• Ensure strip light has not been bent
excessively, which could damage
circuitry.
Lights are
flickering
• Ensure a compatible driver and/or
dimming control is installed. Check
for loose connections.
Lights are
turning on/off
repeatedly
• Ensure driver is not overloaded. An
overloaded driver will trip the internal
auto-reset (of driver) repeatedly,
turning the system on/off.
5
TURN POWER ON AT CIRCUIT BREAKER
6
ATTACH DRIVER AND LIGHTING
CONTROL.
Verify a compatible driver is installed. Utilize
applicable wiring when installing outdoors. (Use of
wet location-rated junction box recommended)
INSTALLATION (CONT.)
Using a pool/spa rated junction box, connect lead
wires from AlphaTECH
®
Strip Light to wet location
rated wires connected to power supply.
OUTDOOR/UNDERWATER INSTALLATION
