Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1G1S1O User Manual
Copyright©2011-2016 Dinstar
15
restored according to the signal of peer device. Under the T.38 mode, fax traffic is carried in
T.38 packages.
Pass-through
: Under the pass-through mode, fax signal is not converted and fax traffic is
carried in RTP packets. It uses the G.711 A or G711U codec in order to reduce the damage to
fax signal.
3.8 Function of RST Button
Press the RST button for different time length, and the UC100-1G1S1O device will execute
different function:
1.
On the condition that the device is running normally, press the RST button for 0 to 3
seconds, the system will not execute any function.
2.
On the condition that the device is running normally, press the RST button for 3 seconds to
6 seconds, the IP address, username and password of the device will be restored to factory
defaults, and meanwhile the access ports of Http, Https, Telnet and SSH are restored to the
default settings.
