3 Configurations on Web Interface
SBC300 Session Border Controller
Copyright©2011-2018 Dinstar
14
6
To add configurations
7
To edit/modify configurations
8
To delete configurations
3.3
Configuration Flows
The following is the general configuration flows of SBC300:
Figure 3-4 Configuration Flow
System Status
Log into the Web interface, and the ‘System Status’ page is displayed. On the page, call statistics and its graphic,
device information, MCU (Main Control Unit) status as well as general information are shown.
Log in Web Interface
Configure IP Address of
GE0/GE1/GE2/GE3
Configure Service Items
Configure Security
Strategies
Upload Certificates
Configure from top
to buttom based
on navigation tree
Complete Other
Configurations
Such as time,
user management
and static routes
