Dinstar DWG2000C, Руководство пользователя, Страница: 28 / 51

DWG2000C-4/8G User Manual
27 / 51
Table 4-7-3 Description of Tel to IP Routing
Figure 4-7-4 Tel to IP routing Modify
It's a default route configured in gateway. It allows any number from source port 0 send call to SIP server
with any prefix.
Tel -> IP Routing
This item uses to configure incoming call routes which can be used for
recieve the calls from the GSM.
Index
It uniquely identifies a route. Its value is assigned globally, ranging from 0 to
31.The route preferentially match the rules which the value of index is smaller
Description It describes the route for the ease of identification. Its value is character string
Source Port It specifies the Port or Port Group which will receive the calls from PLMN
Source Prefix
All the caller number must match the source prefix. It specifies the source
prefix allow to send call out

Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.

0xxxx: consist of some digits such as 015,08,09

1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination Prefix
All the called number must match the destination prefix, the call prefix
indicates the connected number

Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.

0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination Its specifies destination Port or Port Group
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846