Dinsafer DHW01O, Руководство пользователя

Страница: 32 / 41

31
Installation & Notice
10°-20°
1.8-2.2m
Detection blind zone
12m 6m 1.2m
• Open the case and remove the battery insulative strip.
• Pairing with main panel by App before installing.
• Fix the bracket with double-side sticky tape or screws on wall, connect the sensor to bracket, adjust a proper angle. 360° angle adjustment is easily
available with connection of bead and magnetic slice.
• Recommended to install at height of 1.8-2.2m from ground, with gradient 10°~20°.
• Indoor use only. Avoid installing the sensors in area with strong light, temperature changes rapidly or the air stream flows frequently, like close to
windows, air conditioner, refrigerator, heater, oven, and large obstacles.
• Aovid installing two sensors in the same detection scope to interference.
• The sensor is more sensitive to the cross movement than to the vertical movement, so the perference of sensor is best when the detection direction
is vertical to the walking direction of people.