20
WARNING:
• Remove detachable base when
restraint is forward-facing.
• Do NOT place infant in forward-facing restraint until
1 year and 20 lbs.
• ALWAYS use SafeStop installation for forward-facing
child below 40 lbs. (See page 28).
• Do not install this method for a child weighing more than
40 lbs.
• See page 42 for LATCH connector instructions.
Forward-Facing LATCH Installation
1
2
Fig. 1 shows a typical forward-
facing installation with LATCH.
If forward-facing recline is
desired, adjust it prior to
installation (see page 29 ).
1. Confirm vehicle seating
location has its own LATCH
anchors. If it does not, you
must use vehicle seat belt
installation (see pages 22 and 24).
2. Locate LATCH belting secured in storage compartment
on restraint back. Press red release button to remove
each LATCH connector and webbing. Slide the narrow
LATCH tethering strap out of plastic strap guides on
side of the seat.
3. Place restraint in forward-
facing position.
Stability of installation can be
improved by using top tether
shown in blue, Fig. 1 (see page
28 for top tether instructions).
4. Route LATCH belt through
forward-facing belt path
and behind restraint cover.
(Fig. 2)
2
