Dino 210XT, Руководство по эксплуатации

Страница: 9 / 119

DINO 210XT
9
Do not use ladders, steps or other similar equipment on the platform.
Never throw any objects from the platform.
The lift must not be used for transferring goods or persons between different floors or working
levels.
Never disable the operation of any safety device.
Always make sure before lowering the platform that the area on the underside is clear of any
obstructions.
Avoid damaging the platform by lowering it on the ground or bringing it in contact with any
structures.
When working in busy areas the operating range of the lift must be clearly marked either by using
warning lights or fencing.
Also observe the regulations of the Road Traffic Act.
Beware of the live aerial power lines in the area - observe the minimum safety distances:
Voltage Min. distance below (m) Min. distance at the side (m)
100 - 400 V hanging spiral
cable
0,5 0,5
100 - 400 V open-wire cable 2 2
6 - 45 kV 2 3
110 kV 3 5
220 kV 4 5
400 kV 5 5
Keep the lift clean of any dirt which may impair the safe operation and impede the inspection of the
structures
The device must be serviced and inspected regularly.
Only skilled persons who are familiar with the service and reparation instructions are allowed to
carry out the service and reparation work.
It is strictly prohibited to use a lift which is out of order.
The device must not be modified without the manufacturer´s consent.