TPWX2GD/TPWX2GDI/TPW20IEX2GD 11
DAILY MAINTENANCE
To keep the pallet truck scale in good operating condition,
the operator must
perform daily these checkpoints:
Check overall conditions.
Check weighing scale.
Check printer ( if installed ).
Check pump.
Check rollers and wheels.
SCHEDULED MAINTENANCE (MAINTENANCE PERFORMED BY QUALIFIED PERSONNEL ONLY)
Please find below the programmed mainenance operations to be made by specialised personnel. Remember that before
starting the maintenanc one should place the cart on a flat surface.
Make sure to put the pallet truck scale on a flat and solid surface.
Check that nothing is blocking the rollers.
Grease rollers and wheels bearings: the lubrication with lithium grease is foreseen for every 6 months.
Grease control lever on rudder.
Check oil every six months. Fill up if necessary with IP46 hydraulic oil.
N.B.
If oil needs to be replaced, follow the necessary precaution and law requirements for the disposal of the
exhausted oil.
Replace rollers and wheels when necessary.
The foreseen life of the bearings is the following:
-
For applications with a single roller: 900 hours of use;
-
For applications with double roller: 9000 hours of use;
Once reached this time period one should substitute these with bearing of the same model (SKF6204Z).
For any questions or problems check with an Authorised service Centre
.
10. REFERENCE DRAWINGS
120
1150
