Dini Argeo 3590ED Скачать руководство пользователя страница 20

Страница: 20 / 79

3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator

E-AF09_02_16.03_EN_U

- During the axle totalization cycle the display will guide the operator to execute the weighing procedure depending on the

selected functioning mode. Refer to section 13 for details.

VISUALISATION WITH ACTIVE WEIGHT ZOOM

The data is shown on one line under the “weight” section depending on the status of the instrument:

- When not in the axle totalization cycle, the visualization will be as follows:

VISUALISATION

EXAMPLES

WITH ELEMENT

SELECTED

WITH ELEMENT

NOT SELECTED

Indication of the selected elements (CUS:customer /
MAT:material / VEH:vehicle):

Element selected

Element not selected

5.4.1 LCD DISPLAY CUSTOMIZATION (ONLY FOR 3590E INDICATORS)

On the 3590E models it is possible to customize the data displayed on the LCD display, through the print format 99 (see

the

section

“DISPLAY CUSTOMIZATION”,

TECH.MAN.REF.

), by using the DiniTools

™

software.

By pressing in sequence the

and

keys it’s possible to activate the customized visualization.

The default configuration for this visualization is the following:

If more than 4 lines have been programmed, it’s possible to scroll the visualizations by pressing in sequence the

and

keys.
Once that this visualization has been activated, press in sequence the

2ndF

and

keys to display again the standard

visualisations described in the previous sections.

CUS MAT VEH T 1.000

CUS MAT VEH

first description of the selected material

first description of the selected customer

first description of the selected vehicle

MAT.: MATERIAL 1

        CUS.:     CUSTOMER  1
        VEH.:     TRUCK 1
        TARE     0.000 kg

Содержание 3590ED
















































































Результаты поиска

Содержание 3590ED

Отзывы:

Dini Argeo 3590ED, Руководство пользователя, Страница: 20 / 79

Результаты поиска

Содержание 3590ED

Отзывы: