DINGLI JCPT2212DC, Руководство оператора с информацией по обслуживанию

Страница: 33 / 71

OPERATOR
’S MANUAL
with Maintenance Information
Function Tests
28
in either direction.
81 Press the lift function enable button.
82 Lower the platform and drive the machine
off the block.
Test the Pothole Guards
Note: The pothole guards should automatically
deploy when the platform is raised. The
pothole guards activate another limit switch
which allows the machine to continue to
function. If the pothole guards do not deploy,
an alarm sounds and the machine will not
drive.
83 Raise the platform.
⊙
Result: When the platform is raised 4.0m
from the ground, the pothole guards should
deploy.
84 Press on the pothole guards on one side,
and then the other.
⊙
Result: The pothole guards should not
move.
85 Press the drive function select button.
86 Press and hold the function enable switch
on the proportional control handle slowly
move the proportional control handle to the
full drive position.
⊙
Result: The maximum achievable drive
speed with the platform raised should not
exceed 13.8cm/s.
¤
Result: If the drive speed with the platform
raised exceeds 13.8cm/s, immediately tag
and remove the machine from service.
87 Lower the platform.
88 Press the drive function select button.
89 Press and hold the function enable switch
on the proportional control handle slowly
move the proportional control handle to the
full drive position.
⊙
Result: The pothole guards should return to
the stowed position.
Test the Outrigger System
90 Press the lift function enable button. Raise
the platform.
91 Push and hold the auto level button.
92 Press and hold the function enable switch.
Activate the proportional control handle in
the direction indicated by the yellow arrow.
⊙
Result: The outriggers will extend and level
the machine. A beep will sound when the
machine is level.
93 Push and hold the auto level button.
94 Press and hold the function enable switch.
Activate the proportional control handle in
the direction indicated by the blue arrow.
⊙
Result: The outriggers should retract and
return to the stowed position. A beep will
sound when the machine is in the stowed
position.
Test the indoor/outdoor select
Functions
95 Turn the key switch to ground control
position.
96 Turn off Indoor/outdoor button light and
select the indoor mode
97 Press and hold the lift function enable
button. Press and hold the platform up
button.
⊙
Result: The platform should rise.
98 Press and hold the lift function enable
button. Press and hold the platform down
button.
⊙
Result: The platform should lower.
99 Turn on Indoor/outdoor button light and
select the outdoor mode
100 Press and hold the lift function enable
button. Press and hold the platform up