DINGLI JCPT0307 Скачать руководство пользователя | Manualshive

Страница: 9 / 73

background image

OPERATOR’S MANUAL

with Maintenance Information

Safety Rules

5

Be aware of crushing hazards when grasping
the platform guard rail.
Observe and use color-coded direction arrows
on the platform controls and platform decal
plate for drive and steer functions.
Do not operate a machine in the path of any
crane or moving overhead machinery unless
the controls of the crane have been locked out
and/or precautions have been taken to prevent
any potential collision.
No stunt driving or horseplay while operating a
machine.
Do not lower the platform unless the area
below is clear of personnel and obstructions.

Limit travel speed according to the condition of
the ground surface, congestion, slope, location
of personnel, and any other factors which may
cause collision.

Component Damage Hazard

Do not use any battery or charger greater than
24V.
Do not use the machine as a ground for
welding.

Explosion and Fire Hazard

Do not operate the machine in hazardous
locations or locations where potentially
flammable or explosive gases or particles may
be present.

Damaged Machine Hazard

Do not use a damaged or malfunctioning
machine.
Conduct a thorough pre-operation inspection
of the machine and test all functions before
each work shift. Immediately tag and remove
from service a damaged or malfunctioning
machine.
Be sure all maintenance has been performed
as specified in this manual
Be sure all decals are in place and legible.
Be sure the manuals are complete, legible and
in the storage container located in the platform.

Crushing Hazard

Keep hands and limbs out of scissors.
Use common sense and planning when
operating the machine with the controller from
the ground. Maintain safe distances between
the operator, the machine and fixed objects.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil
or air leak. An air leak or hydraulic leak can
penetrate and/or burn skin.
Improper contact with components under any
cover will cause serious injury. Only trained
maintenance personnel should access
compartments. Access by the operator is only
advised when performing a pre-operation
inspection. All compartments must remain
closed and secured during operation.

«
...
7
8
9
10
11
...
»

Содержание JCPT0307










































































Отзывы:

Нет отзывов

Похожие инструкции для JCPT0307

Бренд: Kleton Страницы: 5

Бренд: Kleton Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды