ULM–70
©
Dinel, s.r.o.
11
U N I T S
L E V E L :
m m
D I S P L A Y :
%
T E M P E R A T U R E
°C
D A M P I N G
0 5
UNITS
Level meter can process and convert a large number of different
physical values
. The setting is
done in the item "UNITS".
M I N L E V E L
M A X L E V E L
U N I T S
D A M P I N G
LEVEL: Unit selection (mm, cm, m, in, ft)
DISPLAY: The unit showed on the display
(%, mm, cm, m, in, ft, l, hl, m
3
, gal, bbl, mA)
TEMPERATURE: Temperature unit (°C, °F)
DAMPING
Setting the
response time
of the measurements. The function is useful for suppressing level
fluctuations, waves and rapid changes of the level. The reaction time of the measurement will be
longer and the level meter will respond to rapid changes in a defined delay in seconds.
The damping time can be set in the interval
from 0 to 99 s.
1.
To enter to the menu press
the same button to select "BASIC SETTINGS". Then, using
and
select "UNITS".
2. Now the menu item "UNITS" is shown.
By pressing the
and
button make the settings of
individual items.
3.
By pressing
button save the data. By next presses of the button
leave the menu. The
level meter returns to measurement mode.
M I N L E V E L
M A X L E V E L
U N I T S
D A M P I N G
1.
To enter to the menu press
the same button to select "BASIC SETTINGS". Then, using
and
select "DAMPING".
2. Now the menu item "DAMPING" is shown.
By pressing the
and
button make the settings
of individual items.
3.
By pressing
button save the data. By next presses of the button
leave the menu. The
level meter returns to measurement mode.
1.
To enter to the menu press
the same button to select "BASIC SETTINGS"
.
Then, using
and
select
"MIN LEVEL" or "MAX LEVEL".
2. Now it is shown the item "MIN LEVEL" ("MAX LEVEL"). By pressing
and
set the output cur-
rent "OUTPUT", the distance for the defined current "LEVEL" the value on the display
"DISPLAY".
3.
By pressing
button save the data. By next presses of the button
leave the menu. The
level meter returns to measurement mode.
