Dinel PDU-40-W Series, Руководство пользователя

Страница: 55 / 56

User manual - METER PDU-4x0-W
Parameter Description Default value User's value
Desc.
page
Hi r Extension of the top of the nominal input range 5.0 (%) 31
Current output configuration (“OUtP” menu)
Omod Current output mode
„4-20” (mA)
32
OUtL Display value for 4 mA current output 0.0 33
OUtH Display value for 20 mA current output 100.0 33
Lo r Extension of the bottom of the nominal output
range
5.0 (%)
33
Hi r Extension of the top of the nominal output range 5.0 (%) 33
AL Current output value on critical exception 22.1 (mA) 33
Display parameters
bri Display brightness bri6 34
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes norm 34
PEA Minimum detected change 0.0 34
timE Maximum time of peak displaying 0.0 34
HdiS The type of displayed value HOLd 34
H r1 Source of relay R1, and LED R1 control rEAL 34
H r2 Source of relay R2, and LED R2 control rEAL 34
HOut Source of current output control rEAL 34
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on
35
A r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on
35
RS 485 interface configuration (menu “rS”)
Addr Device address 0 35
bAud Baud rate 9.6 35
mbAc Permission to changes of configuration registers on 35
mbtO Maximum delay between received messages 0 35
rESP Additional delay of answer transmission Std 35
Configuration of numerical parameters edition
Edit Numerical parameters edit mode dig 36
55