Dinel PDU-40-W Series, Руководство пользователя

Страница: 54 / 56

User manual - METER PDU-4x0-W
12. DEFAULT AND USER'S SETTINGS LIST
Parameter Description Default value User's value
Desc.
page
Parameters of relay R1 operation (“rEL1” menu)
SEtP Relay R1 threshold 20.0 25
SEt2 Relay R1 second threshold 40.0 25
HYSt Hysteresis of relay R1 0.0 26
modE Operation mode of relay R1 on 26
t on Turn on delay of relay R1 0.0 26
toFF Turn off delay of relay R1 0.0 27
unit
Unit of “t on” , “toFF” parameters of relay R1
SEC 27
AL Reaction for critical situation of relay R1 oFF 27
Parameters of relay R2 operation (“rEL2” menu)
SEtP Relay R2 threshold 40.0 25
SEt2 Relay R2 second threshold 60.0 25
HYSt Hysteresis of relay R2 0.0 26
modE Operation mode of relay R2 on 26
t on Turn on delay of relay R2 0.0 26
toFF Turn off delay of relay R2 0.0 27
unit Unit of “t on” , “toFF” parameters of relay R2 SEC 27
AL Reaction for critical situation of relay R2 oFF 27
Configuration of measurement input (“inPt” menu)
tYPE Input mode „4-20” 27
CHAr Conversion characteristic mode Lin 27
FiLt Filtering ratio 0 28
Pnt Decimal point position 0.0 28
Lo C Minimum displayed value (for nominal range) 000.0 28
Hi C Maximum displayed value (for nominal range) 100.0 28
t h1 Height (length) first part of the tank 00.00 28
t h2 Height (length) second part of the tank 00.00 28
t h3 Height (length) third part of the tank 00.00 28
t d Tank diameter 00.01 28
t Sn Distance between sensor and bottom of the tank 00.00 29
t Sh Height of the sensor 20.00 29
Lo r Extension of the bottom of the nominal input range 5.0 (%) 31
54