Issued by: PM approved by DG Rev.01 date 03/09/18 pag. 5/10
Feature available for
both Rapid Bike Evo
and Racing modules
Feature available for
both Rapid Bike Evo
and Racing modules
RPM => RPM/Speed control
AFR =>
displays/modifies the fuel mixture => OEM O2 sensor
Push (+) (+)
Value goes from 0
to 2, increasing of
two points target
of Auto-adaptive
feature
LEDs indicate a slightly lean
mixture, pushing two times
button (+) the fuel mixture
will be enriched, therefore
lowering the AFR
PUSH
(MODE
)
Adjustments range: ±2 points
Pressing again button (-) after “-2” will display “OFF”:
Auto-adaptive feature is disabled; trim map will no
longer be modified but is still active
Changes the Auto-adaptivity target on Rapid Bike Evo and Racing
Press button (-) for 2 seconds to
activate an rpm limiter at the
actual rpm value
LEDs flash alternately
Modify it, by steps
of 100 rpm, with
buttons (+) and (-)
To disable it, push
MODE
button, or press
button (-) for 2 seconds,
or open completely the
throttle (not for bikes
with ride-by-wire)
In order to enhance the
riding comfort, we suggest
setting it almost 500 rpm
higher than needed.