Dimplex Willowbrook WLL20, Руководство по эксплуатации

Страница: 3 / 12

The fire incorporates a flame effect, which can be used with or without heating, so that the
comforting effect may be enjoyed at any time of the year.
A fan heater can provide heating in cold weather. A distance of 1 metre (3 feet) must be maintained
between the front of the heater and any surrounding furniture, overhanging curtains or other
obstructions.
Always ensure that the appliance is sitting on a level surface.
Before connecting the appliance, check that the supply voltage is the same as that stated on the
appliance.
Only use filtered water in this appliance.
Once installed, never move this appliance or lay it on its back, without draining the water from
sump and water tank. The water tank, sump, sump lid, tank cap and air filters must be cleaned
once every 2 weeks, particularly in hard water areas. If you intend not using the appliance for
longer than 2 weeks, drain the water from sump and water tank and dry the sump.
Please note: Used in an environment where background noise is very low, it may be possible to
hear a sound which is related to the operation of the flame effect. This is normal and should not
be a cause for concern.
The sump and the water tank in this product are treated with a biocidal product, Silver Biocide
in order to control harmful or unwanted organisms. This conforms with the latest relevant ISO
standard
Do not drink the water from the sump or from the water tank(s)
Technical Information
Model No: WLL20
Thank you for choosing a Dimplex electric fire
General Information
Dimplex Opti-myst Stoves
Model: Willowbrook
Warning:
In order to avoid overheating, do not cover the appliance. Do not place material or
garments on the appliance, or obstruct the air circulation around the appliance, for instance by
curtains or furniture, as this could cause overheating and a fire risk.
The appliance carries a DO NOT COVER warning
Warning:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
with electronic room temperature control.
Heat Output 230V 240V
Nominal Heat Output
P
Nom
1.6 1.8 kW
Minimum Heat Output
P
min
0.8 0.9 kW
Maximum Continuous Heat Output
P
max
1.6 1.8 kW
Auxiliary Electricity Consumption
In Standby Mode
P
Nom
3.0 3.2 kW
3