14
DF3215
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE FLAME MOTOR/FLAME ROD
15. Repeat this process for the (4) remaining wires. (red, blue, orange, grey)
16. Reconnect the logset LED wire harness.
17. Replace the logset by inserting the front of the emberbed under the front edge of the
fireplace and push down on the rear edge of the emberbed until it snaps into place.
NOTE
Ensure the logset is installed tightly under the back ledge to prevent light leakage.
18. Reassemble in the reverse order.
