Dimplex DXDB20E, Инструкция по установке и эксплуатации

Страница: 7 / 10

Operation
1. Plug the unit into a correct mains socket. (Please refer to the rating label at the
rear of the unit for correct voltage/frequency.)
2. Press ON/OFF button to turn on the unit. The compressor will start to work.
3. Press humidity setting button to set the working mode you require:
continuous working, humidity 40%, 50%, 60% or 70%. The relative indicator
will light on.
4. Press speed/ventilation button to set the ventilation speed to high or low.
The selected indicator light will come on.
5.
Press the TIMER button to set the operating time you require (1~24 hours). The
display window will show the hour(s) you set as you press the TIMER button,
after releasing it for around 8 seconds, the display window will return to the room
humidity.
When the set time has been reached, the compressor will stop working
automatically.
6.
By pressing the ”TEMP” button, the display window will show the room
temperature, after releasing the button for around 8 seconds, the display
window will return to show the room humidity.
7.
DRYER function is turbo ventilation to dry the moisture in the air
continuously, so it will help to dry the laundry.
8. To turn off the unit, press ON/OFF button again.
9. Pre-setting function. By pressing the TIMER button but without turning on
the other functions (including ON/OFF button), you can PRE-SET the time for
the machine to work. For example, if you press the timer to '2', the unit will turn
on automatically after 2 hours.
6
Blue light – room humidity > 70%
Green light – room humidity 50~70%
Red light –room humidity < 50%
Red light flash – water full alarm