18
The unit evaporates the condensation and distribute through the exhaust hose.
1. In COOLING mode, the drain pipe is unnecessary to be installed. Please ensure
the rubber cap locked on drain hole when the unit operating.
2. In HEATING mode, please pull out the rubber cap
1
to install the drain pipe to
keep the best heating efficiency.
3. In DEHUMIDIFYING mode, please pull out the rubber cap
1
to install the drain
pipe, and remove the exhaust hose to keep the best dehumidifying efficiency.
• When the water tank is full, the display <
> shows <E4> on screen. Please
remove the rubber cap
2
of the bottom drain hole to release the water. After
the drainage, press power to restart the unit.
Important Messages
POWER SUPPLY
1. Confirm to connect to the correct power.
2. Insert the plug into the outlet firmly to prevent from electricity leakage.
3. Never pull power cable by force, or the cable may be damaged..
PLACE FOR USE
1. Please place the unit in a wide and ventilated place, ensuring a smooth
exhaustion.
2. Never place the unit in water or wet place to avoid the danger of electricity
leakage.
3. Do not place the unit in sunlit corner, otherwise the unit might be overheated
and shut down. Besides, the color of the machine may change or fade out.
HELPFUL HINTS
The unit is fitted with a special thermal cut off device.
Please ensure the unit is not placed against any objects (e.g. furniture or
curtain). Obstructing air inlet may affect the performance dramatically.
15429_Dimplex DPRC40U Manual.indd 18
15429_Dimplex DPRC40U Manual.indd 18
9/09/20 6:40 PM
9/09/20 6:40 PM
